Saturday, May 14, 2011

Thursday, May 12, 2011

Light at the end of the launcher tube.

So rigging this boat is a lot of work. Estimate how long each project will take, then multiply by 4. Check us out on Facebook for daily updates on the rigging project. Too tired at night to post here. The picture below sums up how badly I would like to finish this up.

Sunday, May 1, 2011

Guy Angle Risers

I used some tapped G10 to accept the cheek block fasteners and some foam to fill the void behind the plates. This was all bonded with a thickened epoxy mixture. McLube on the fasteners prevents the epoxy from bonding to the stainless.